Agni

Product Details:

Manual Call Point – Metal MCP in MS Housing  or Glass break MCP for Conventional Fire Alarm System is used for giving fire signal to Fire Alarm Panel.

Generally When Fire Breaks down, people get panic at that time if some watch fire, then s/he push MCP and it send signal to Fire Sounder,

Product Details:

Material ABS Plastic Input Voltage 24V DC Current 100 mA @24V Relative Humidity 95% Operating Temperature 0 to 50° C Sound Level 100db +/- 5db @ 30cm Tone Type Sweep Siren Size 120(w) x 120(H) x 45(D)mm

Product Details:

Agni 8 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone. These units have been designed to offer high standards of performance, reliability and quality and comply with IS 2189:1999 and tested by the ERTL (N) System Sensor. The Orion series panels are specially suited for the small offices workplaces. t?s compatible with GST conventional detectors, manual call points, and sounders. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch.

Product Details:

Owing to rich industrial experience we offer a wide assortment of Smoke Detectors These products are able to sense smoke and alarms immediately They are suitable to provide prevention against fire Moreover to meet the requirements of clients we test the quality of these products rigorously under various parameters Our products are available in the market at industry leading prices

Product Details:

We are engaged in offering a wide range of Agni Heat Detector to our clients Our range of all products is widely appreciated by our clients.

Additional Information:

• Delivery Time: 1DAY

Product Details:

The Sounder cum strobe is designed to give the audio & visual indication in case of emergency & fire.
FEATURES :

ABS Plastic Body

High Sound output / Light Source

Additional Information:

• Delivery Time: 1 day

Product Details:

Product DetailsProduct Specification Alarm Current56 mAOperating VoltageDC (10.9 ~ 40) VOperating Temperature0 deg C ~ +60 deg COperating Humidity0% ~ 97% RH, non-condensingStand by current55 mA Product DescriptionIn this industry, our name is regarded as one of the eminent manufacturers, supplier and trader of Fire Detector.
Features:
High immunity against unwanted alarms
Stable heat chamber, No adjustment or replacement required
Dual LED for 360-degree visibility
2 wire based detector
Dual LED for 360-degree visibility
2 wire based detector
Advanced algorithms provides advanced detection discrimination
Easy installation, No programming required
Low maintenance
High immunity against unwanted alarms
Stable heat chamber, No adjustment or replacement required

Specification:
Heat Sensitivity: 135
Dimension: 101 mm (dial) x 49 mm (ht) with base
Heat Sensitivity: 1.61% / ft ~ 2.82% / ft obscuration
Reset Voltage Less than 2 volt
Reset Time Less than 3 sec.
Alarm Indication Two continuous emitting red LED
Weight: 142 g/set with base F/ROR 220 μA
Surge Current (max.): 120 μA
Start-up time (max.): 70 s
Maximum permitted: 84 mA current
Frequency: 2-6 seconds

Product Details:

Technical Specification:- Operating Temperature (Environmental) : 10C + 50C Relative Humidity : <95% No condensation Height : 16mm Diameter : 100mm Colour : White Material : ABS

Additional Information:

• Item Code: 601
• Production Capacity: 250
• Delivery Time: 1 DAYS

Product Details:

We are the leading supplier of gst conventional smoke detectormade available to our clients at competitive prices.

Additional Information:

• Delivery Time: 1 day

Product Details:

We are the leading supplier of gst intelligent smoke detectormade available to our clients at competitive prices.

Additional Information:

• Delivery Time: 1 day

Product Details:

We are engaged in offering a wide range of Simplex Smoke Detector to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

Key Features 
*The 2351 EC Detector Forms Part Of The Range Of Conventional Detectors .The 2351EcPhotoelectric Detectore  Incorporates an Application Specific Integrated Circuit (ASIC)
*Tested And Approved To EN

Get best price for Plastic Morley Lite Detectors 2351/EC, For Office Buildings

Additional Information:

• Delivery Time: 3 DAYS

Product Details:

infra red photoelectric sensor, dust proof mothproof anti-light interface desing, stainless steel shield in chamber

Additional Information:

• Delivery Time: EX STOCK

Product Details:

SMT Design, High stability.  Wide supply voltage range.  360 visible red status LED and output for response indicator.  Indication of normal operation by flashing every 4 sec.  Maintenance mode indication by flashing LED every 14 sec.

Product Details:

We are the leading supplier of agni conventional smoke detectorsmade available to our clients at competitive prices.

Additional Information:

• Delivery Time: 1 day

Product Details:

We are engaged in offering a wide range of Agni Smoke Alarm to our clients. Our range of all products is widely appreciated by our clients.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5 day

Product Details:

Features:

• Battery backup with built in charger
• Fire, fault status in unambiguous colored LED indications.
• 16 x 2 line dot matrix LCD display
• Zone wise fire, open, short LED indications.
• External switches to test each zone fire, open, short status manually.
• External switch for reset, Silence, Lamp test.
• Zone isolation facility with loop voltage cutoff.
• Relay O/P for actuators.
• Mains on, System On, Charger on, visual indications.
• Battery Low & Common fire indications
• Auto dialer attachable facility
• Enough inside space for battery
• Attachable with all types of detectors.

Additional Information:

• Delivery Time: 1 day

Product Details:

Matching up with the requirements of our clients, we are involved in offering Multi Criteria Photoelectric Smoke Detector.

Additional Information:

• Item Code: 2351TEM

Product Details:

W-SD355 and W-SD355T addressable, wireless photoelectric detectors use a state of the art photoelectric sensing chamber to provide open area protection. The W-SD355T adds thermal sensors that will alarm at a fixed temperature of 135 F (57 C). The W-SD355 and W-SD355T communicate with the fire alarm control panel (FACP) through a wireless mesh network to the W-GATE wireless gateway. Note: Must be used with an ES-200X, ES-50X, MS-9600(UD)LS or MS-9200UDLS FACP

Additional Information:

• Delivery Time: 1 WEEK

Product Details:

Owing to our proficiency in this domain, we are providing our clients an optimum range of Manual Call Point. 

Additional Information:

• Delivery Time: 1 day

Product Details:

• The microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.
  RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Additional Information:

• Delivery Time: 1 day

Product Details:

We are the leading supplier of notifier smoke detector fsp 851 made available to our clients at competitive prices.

Get best price for Honeywell Optical Notifier Smoke Detector Fst 851, For Office Buildings

Additional Information:

• Delivery Time: 1 day

Product Details:

An addressable smoke detector is part of an addressable fire alarm system that consists of a group of smoke detectors and devices linked to a central fire control panel. In an addressable fire alarm system, an activated smoke detector can quickly be isolated and found because each device has a unique address or number.

 

Features:

• Effective customer support
• On-time completion
• Applied latest methodology

 

We are the leading supplier of honeywell addressable smoke detector made available to our clients at competitive prices.

Get the best price for Honeywell Addressable Smoke Detector

Additional Information:

• Delivery Time: 1 day

Product Details:

The 2351E photoelectric smoke detector forms part of the Series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With its multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’. The 2351E photoelectric detector incorporates an Application Specific Integrated Circuit (ASIC). Combined with the latest state of the art optical chamber the detector provides efficient and accurate detection of fires with a high level of resilience to non-fire environmental influences. The 2351E and other detectors in the Series 300 range are backward compatible with the Series 100 detector bases, thus providing the capability to upgrade, extend and maintain existing Series 100 installations. The 2351E detector incorporates a bi-colour LED indicator. The integral LED changes colour according to the detector’s status - Green = Normal, Red = Alarm. This benefits the user by providing clear, instant visual indication of the detector’s condition. The Green LED can be programmed for blink/no blink operation. ‘Drift compensation’ algorithms are one of the key features of the 2351E detector. These algorithms ensure a consistent alarm sensitivity threshold for periods between service intervals. This provides the user with both a reduction in the frequency of nuisance alarms and maintenance savings by extending the period before cleaning of the detector chamber is required. The sensitivity of a smoke detector is critical to its overall performance, this is reflected in both its ability to detect real fire conditions and its resilience to non-fire stimuli. The 2351E’s performance can be optimised for it’s application by selecting from one of three preset alarm thresholds - Low, Medium and High, offering greater stability and optimum performance within the environment in which it has been installed. The selection is easily achieved through the use of a remote hand-held tool. The remote hand-held programming unit can also be used in conjunction with the Series 300 range of detectors to gain access to other advanced features. The features available include: read/write last maintenance date, read chamber contamination level, read value of thermal element and perform an alarm test.

Additional Information:

• Delivery Time: 1 day

Product Details:

• Complies to IS 2189: 1999 and Tested by ERTL (N). • 2 X 16 character backlit LCD display. (4 x 20 character, Optional) • 64 / 128 / 256 / 512 Events logging facility with real time clock and keypad. (Optional) • 2 wire Communication facility via RS 485 Port. (For Repeater Panel) (Optional) • Computer attachment with Printer Facility (Via RS 232 Port) (Optional) • BMS attachment facility. (Optional) • Lamp test feature. • Complete with integral power supply and battery charger for sealed lead acid battery. • NO/NC contacts for both fire and fault. • Switches to enable on board operation. • LCD and LED Indication for open, short circuit, Isolate, Fire in each zone. • Maximum nos. of Detectors in each zone is 25.