Fire Alarm Control Panel

Product Details:

???Battery backup with built in charging. ?16 X 2 LCD Dot Matrix Display. ?Evacuate and Key pad Enable, Disable Facility. ?Low battery visual warning with audible tone. ?Relay output for actuators. ?Provision for Remote fire with Audio / Visual Indications. ?Compatible to all types of conventional detectors. ?Zone Disable (Isolation) facility with loop voltage cut off. ?Resettable 24 VDC output for 4 wire detectors. Three 24V Sounder Output (Fire, after Cross zone, ?after gas release). ?Two mode operation facility (Auto / Manual). ?Programmable Solenoid Output with ON and OFF Timer. ?Programmable Main / Standby Cylinder output Facility. ?Gas Inhibit and Instant release facility. ?Manual Gas Release with or without timer. ?Actuator pressure low sensing facility. RS 485 Output for Repeate

Product Details:

One full SLC circuit expandable to two 3 programmable relays 5.25A power supply Large graphic display Real time clock Compatible with eMATRIX graphics annunciator Powerful, network wide cause and effects (500 total). Fully user programmable by point or zone. Can be networked with additional RS and/ or Elite control panels Compatible with eVIEW Annunciator Programmable through a PC connection to the panel Same look and feel as Elite range Stores 1000 last events in history log Model ranges include with or without a Dual-Line internal DACT Compact, stylish enclosure Available in Red or Gray 2 Programmable NAC circuits with internal synchronization support.

Product Details:

Mechanical Specifications
Dimensions (H X W X D)
360 X 422 X 122.8 mm (Front Facia),
360 X 380 X 92.3 mm (Back Box)
Weight
5.8 Kg Approx. (No Battery Fitted)
Construction
Powder coated Cold Rolled STEEL 1.2mm thick
Cable Entry
15 X 20mm Knockout
Operating Temperature
0 to 49°C
Relative Humidity
5% to 95% Non-Condensing

Electrical Specifications

Operating Voltage
230V-AC +/- 20% Output current 2A
maximum, Alarm Load 1A Maximum
Standby Batteries
Minimum capacity 2 x 12 V 2.8Ah, Maximum capacity 2 x 12 V 7 Ah
Detection Circuits
2, 4, 6, 8 zone, Max 2mA per Detector Circuit
Input Trigger Extended closing contact
Trigger External Outputs
Sounder Outputs:
• 2 monitored outputs
• 0.5 Amps per circuit
Auxiliary Output:
• 18.5 to +28.5 Vdc, 0.5 Amp. (max)

Additional Information:

• Delivery Time: 1 DAYS

Product Details:

Hi-Intensive sound (80 to 100 db) speaker for fire alarm Three feature in a single cabinet Easy to installation MS chain hammer to break glass. Push to on switch to activate talkback system (optional).

Additional Information:

• Production Capacity: 1 DAY

Product Details:

he Orion series of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone. These units have been designed to offer high standards of performance, reliability and quality and comply with IS 2189:1999 and tested by the ERTL (N) & System Sensor. The Orion series panels are specially suited for the small offices & workplaces.

Additional Information:

• Delivery Time: 1 day

Product Details:

The NFS2-3030 Fire Alarm Control Panel is part of NOTIFIER's UL listed ONYX Series. The NFS2-3030 supports over 3,000 intelligent devices on ten Signaling Line Circuits, perfect for protecting large scale applications.

Features and Benefits:

• Large 640-character LCD backlit display or displayless
• Networkable with NOTI-FIRE-NET and ONYXWorks compatible up to 200 nodes for NFN
• Built-in degraded mode option
• Optional integrated Digital Voice Command (DVC)
• EIA-485 annunicators, including custom graphics
• FM6320 approved gas detection system
• Listings: Releasing, Mass Notification, Seismic Certified, Marine Approved

Product Details:

We Are dealing in best quality Agni Fire Alarm Control Panel

Additional Information:

• Delivery Time: 1 DAY