RAVEL

Product Details:

?Features: ?Module Status by YELLOW LED. ?Low Standby Current. Available with suitable back boxes E?lectrical Characteristics ?Min Supply Voltage (Vmin) : 17V ?Max Supply Voltage(Vmax) : 28VDC ?Nominal Supply Voltage(Vnom) : 24VDC Quiescent Current at 24V(Ic) : 30 A ? O O Operating Temperature : 10 C to 49 C ? O O ?Storage Temperature : 10 C ?Leakage Current at 24V(IL ) : 2 mAwhen isolating ?Max Curent (through loop)(IS ) : 1Acontinuous, 3APeak ?Isolating Voltage (Vco) : <14V ?Maximum on resistance(Zc) : 0.02 Re-connect Voltage(Voc) : 14 ~ 16V µ to 60 C. RE -717MI Dimensions : (95 W X 75 H X 24D) mm Color : Black Weight : 0.35Kg 

Product Details:

- UL Listed. - FIRE ALARM written on enclosure. - RED colour. - Easy to install - Lift and Pull - Break glass Rod. - All stations offer hex screw or key lock access.

Product Details:

RE-428 Series Beam detector can be used for both conventional and addressable Fire Alarm System. In case of addressable system suitable RE-717ZM (Zone Interface Module) to be incorporated for each detector.

Product Details:

 Fully complies with UL -864 and NFPA-72. ? Rugged CRCA sheet with powder coated finish. ? Operates on 110 - 220VAC 50 /60 Hz, AC mains power supply. ? 16x2 Dot Matrix LCD display. ? 4/8 Class B Style ‘B ‘ or Style ’C’ initiating device circuit (IDC). ? All zones accept smoke detectors and normal open contact devices. ? Any zone can be configured as alarm or supervisory zone. ? 2 Class B notification appliance circuits (NAC). ? NAC shall be programmed as silenceable or non - silenceable. ? Supervisory zone shall be latching or resettable. ? Standby (battery) backup 24VDC power supply with built in charger ? Error free Fire / Fault status in unambiguous colored LED indication. ? System ON indication. ? Main & Standby status with audible and visual indication. ? Battery low visual warning with audible tone. ? Form C relays for fire, fault and supervisory. ? Resettable / Steady 24VDC Output. ? RS 485 Communication facility (Optional). ? Lamp test facility. ? All field wiring circuits are power limited except 110 - 220VAC and battery. ? All field wiring circuits are supervised. ? Walk test facility. ? Zone isolation facility with loop voltage cut off. ? Earth fault annunciation facility at 0 ohms. ? AC low voltage cutoff. ? Programmable AC loss delay. ? Programmable alarm verification. Programmable trouble reminder. 

Product Details:

?Operates on 120 to 220VAC, 60 / 50 Hz, 120W. ?Battery Backup 24V DC with built in charger. ?40 x 4 characters LCD display. ?Loop with Class A or Class B wiring. ?Maximum 127 Devices exclusive of 20 Loop Sounder. ?Upto 192 Grouping Facility. ?Device / Detector wise configuration facility. ?2000 Event with Real Time Clock. ?USB 2.0 Interface for PC connectivity. ?Two Programmable Form C potential free relays (Fire, Pre - Alarm & Supervisory). ?One Form C Potential free relay for Fault. ?24V DC output. ?One Supervised Notification Appliance Circuit.(NAC) RS 485 Connectivity for repeater.

Product Details:

The addressable Loop powered sounder are designed to be connected to analogue addressable Fire Alarm Systems. And these loop powered sounder should be connected to the compatible control panel. The addressable loop powered sounder receives their power from analogue addressable communication loop and it is controlled via addressable communication. The address of these device shouldbe in the range of 128to159addressesanditshallbesetby8wayDIPSwitch. - Addressing by 8 way DIP switch. - Low Standby Current. - Slim and Sleek. - 8 Different tone selection by using 4 way DIP Switch. - Wall or Ceiling Mount. - Inbuilt Isoaltor 

Product Details:

??CE Approved. ? O ?Dual LED’s for 360 visibility. ?Advanced detection and communication protocol. ?Stable photoelectric smoke chamber. (No adjustment or replacement required.) ?Easy installation and maintenance. ?Sleek low-profile housing design. ?Regular 100mm base. Simple soft address programming Complies with EN 54. through FACP / Programming Tool Features: ??Operating Voltage : 17 ~ 28V DC ?Reset Voltage : less than 3V ?Standby Current : 500 µA. ?Start up Time : Less than 30s. ?Alarm Current : 5 mA. ?Reset Time : less than 30s. ?Sampling Time : less than 1s. Remote Output : 2mA maximum open collector ? O O Operating Temperature : -10 C to 50 C ? O O ?Storage Temperature : -10 C to 60 C ?Humidity : 10 - 95% RH, non-condensing Smoke Sensitivity : 0.10 dB/m ~ 0.14dB/m. Analogue Addressable Photoelectric Smoke Detector RE - 337S Product Overview The RE - 337 S addressable detectors are designed to work with Moniti O Panel. These detectors are low profile and have dual LED’s for 360 visual indication. The whereas the steady state indicates fire status. Detector addressing is electrically programmed into the detector at the time of installation. It has an unique chamber designed to sense smoke produced by wide range of sources of combustion. The detectors sensitivity can be programmed through Fire Alarm Control Panel. It has a unique drift compensation feature detector adjusts its normal reference based on environment conditions. blinking LED's indicate normal operating conditions where the Electrical Specification Wiring Diagram: Mechanical Specification: ??Height : 46 mm with base ?Diameter : 100 mm dia ?Weight : 150g with base IP Rating : IP - 42

Product Details:

1. Operating Voltage : 24V DC 2. Operating Current : 40 mA Max. 3. Sound Level : 4. Operating Temperature : 0 - 49° C / 32-120° F. 6. Sounder Type : Piezo Electric Type 7. Tone Type : Fire Engine Siren 8. Material : ABS Plastic 9. Colour : Red 10. Dimensions : 96 H mm X 76 L mm X 32 D mm 11. Back Box : 100 ± 5 d 5. Storage Temperature : 95 H mm X 75 L mm X 66 D mm

Product Details:

UL/CE listed.

Dual LED’s for 360° visibility.

Advanced detection and communication protocol.

Easy installation and maintenance.

Sleek low-profile housing design.

Regular 100mm base

Additional Information:

• Delivery Time: 1 day

Product Details:

9 to 32 VDC Volts Non-polarized
Standby Current
≤100µA @ 24 VDC
Maximum Alarm Current (LED on )
≤55mA @ 24 VDC
Operating Humidity Range
10% to 93% Relative Humidity, Non-condensing
Operating Temperature Range
14°F to 120°F (-10°C to 49°C)
Adjustable Sensitivity
1-2.5%/FT
Height
2.2 (55 mm) installed in Base
Diameter
4.0 (103 mm)
Weight
5.5 oz. (155 g)

Additional Information:

• Delivery Time: 1 day

Product Details:

- CE Approved. - 16 X 2 Dot Matrix LCD Display. - Standby battery backup with built in charging. - Switch Mode Power Supply. - Tactile Keypad for easy panel operation. - System ON indication. - Low Battery visual warning with audible tone. - Fire / Fault status in unambiguous colored LED indication. - 2 programmable relays for fire, supervisory and fault. - All zones accept smoke detectors and any normally open contact device. - Any Zone can be configured as alarm or supervisory. - Zone wise isolation and one man walk test facility. - Programmable Aux Outputs. - Lamp test & Drill test facility. - 100 All Events log with RTC. - Date / Time / Password configuration. - Programmable auto silence facility. - Zone wise sounder / contact (optional). - TCP-IP / GSM facility (optional). - All field wiring circuits are supervised. 

Product Details:

RE-102/104 is a right blend of affordability design, user friendly, latest technology and quality for fire alarm panels. While implementing the latest in microprocessor technology for conventional panels ease to operate along with clear visible indications come at an advantage for the end user. These are stand alone panels with 2 & 4 zones versions. It has the optional facility for zone wise sounder / relay contact

Product Details:

UL Listed Analogue addressable Multi Sensor detector with smoke detector and the combination of heat detector with fixed temperature of 59 degree Centigrade and Rate of raise facility of 11.1.Deg C /min with 8 digit dip switches for ( 1 to 254) address settings. Dual LED indication for 360 degree visibility, milky white in color, shall be polarity insensitive, easy to install, advanced detection and communication protocol with insect filter chamber.

Features:

UL Approved.

Dual LED’s for 360° visibility.

Advanced detection and communication protocol.

Polarity Insensitive.

Easy installation and maintenance.

Sleek low-profile housing design.

Regular 100mm base.

Max. 254 Address setting through 8 way DIP switch.

Get best price for RE-317D-SHL Ravel Add Multi Sensor Detector

Additional Information:

• Production Capacity: 1 DAY

Product Details:

Matching up with the requirements of our clients, we are involved in offering RE-716MR Ravel Manual Call Point.


Features:

• Alarm status is indicated By Red colour LED.
• Operates on 24 VDC.
• Green Colored for Emergency Release.
• Yellow Colored for Abort.
• 1 No’s of CO & NC Output (Optional).

Product Details:

* Complies with UL -864 and NFPA-72. * * Operates on 120 - 220v 60 /50 Hz, AC Mains power supply. * Standby (battery) backup 24v DC power supply with builtin charger. * Touch Keypad for user friendly operation. * Epoxy powder coated finish. * Class- B, Style B / C initiating device circuit (IDC). * All zones accept smoke detectors and any normally open contact device. * Class B Notification Appliance Circuits (NAC). * NAC shall be programmed as auto silence / Silence Inhibit. * Error free Fire / Fault status in unambiguous colored LED indication. * 1000 Event storage with RTC. * Main, Standby status with audible and visual indication. * Two Form C relays for fire and fault. * Resettable / Steady 24V D.C. Output. * RS 485 Communication facility. * TCP/IP facility (Optional) *MODBUS for BMS integration (Optional). * PC software (optional) * External Zone Wise Sounder/Contact via RS 485 (Optional). * All field wiring circuits are supervised. * Zone Isolation facility with loop voltage cut off. * Facility to connect Public Address System (PA) through RS-485 Communication. * Maximum 16 panels can be connect in a Single Network

Product Details:

RE-717MC Control Module is the remote switching device to control 24V operating devices like Bells, Sounders, Strobes, etc. The required supply is drawn from a 24V power supply unit. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. DIP switches are provided for addressing of the module. The output circuit is supervised for faulty condition. Special Features: Features: ??Indian Manufacturer - International Standard. ?UL-Listed (9th Edition). Modular Construction. ??Supervised a Class ‘B’ Style ‘Y’ output circuit. ?Module Status by RED LED. ?Analogue Communication with the panel. ?Module Addressing by 8 way DIP switches. ?Low Standby Current. Available with suitable back boxes.

Product Details:

Operating Voltage : 24 VDC Nominal. Current Draw : 2 mA Max.(Latched) Standby Current : 0.5 mA End of Line Resistor : 47K Ohms Communication Line Loop Impedance : 40 Ohms Line Loss : 4 VDC Max. External Supply Voltage : Regulated 24V. Max. Output Current Drive : 1 Amps.(Supervised) o o Operating Temperature : 0 C to 49 C / 32 - 120 F Storage Temperature : Relative Humidity : o o o o 0 C to 60 C. 93 ± 2% RH (non-condensing) at 32 ±2° C / 90 ±3° F

Product Details:

RE-717MR Relay Module facilitates third party devices to interface with Ravel addressable panels. R The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. DIP switches are provided for addressing of the module. The Monitor circuit is supervised for faulty condition.

Product Details:

RE-737MM Monitor Module facilitates third party devices to interface with Ravel make addressable panel. Monitor Module is an input interface device for devices like security contacts, waterflow switches, pull stations etc. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. The Monitor circuit is supervised for faulty condition. The module Addressing is done by soft addressing method through Programming tool or through the panel.

Product Details:

RAVEL ADDRESSABLE SMOKE DETECTOR
CE APPROVED
MONITI RE 337S
MADE IN INDIA

Product Details:

Two sensor multi criteria fire detector incorporating photoelectric and thermal sensing elements

Feature

• Multi-sensor Detectors are a combined optical smoke and heat detector allowing flexibility in the detection of fires.
• Using the combined detection method a fire condition can be confirmed if both heat and smoke sensors operate.
• These Detectors are general purpose detectors which respond well to a wide range of fires.

Get best price for Conventional Multi Sensor Type Detectors, for Office Buildings

Additional Information:

• Delivery Time: 1 day

Product Details:

Rugged CRCA sheet with powder coated finish. Operates on 220v, 50Hz AC supply. Standby battery back up with built in charging. Error free Fire / Fault status in unambiguous colored LED indication. Switch Mode Power Supply. 16 X 2 LCD Display. Tactile key pad for easy operation. Main, Standby status indication. Low Battery visual warning with audible tone. Zone wise one man walk test facility. Relay output for actuators. Lamp Test facility. Zone Isolation facility with loop voltage cut off. Programmable Keypad lock. Programmable Auto Silence. Compatible to all types of conventional detectors.

Additional Information:

• Delivery Time: 1 day

Product Details:

Sounder

Straightforward DIL switch addressing

• Attractive low profile design
• Excellent lateral sound distribution
• Three Evacuate tones (continuous, warble or sweep) and one Alert tone
• High (100dB @ 1m) and low (94dB @ 1m) volume settings
• A BS5839 Part 1 2002 Clause 12.2.2 compliant locking facility
• A ‘quick-fit’ bayonet fixing arrangement
• ‘Master’ or ‘shadow’ mode operation (allows multiple shadow sounders to be
• given the same ID address as one ‘master’ sounder, a useful feature on heavily
• populated systems and to give synchronised sounding)
• A group addressing facility allowing multiple sounders to be activated
• simultaneously

Additional Information:

• Delivery Time: 1 day

Product Details:

Matching up with the requirements of our clients, we are involved in offering RE-24CS Ravel Mini Horn .

Additional Information:

• Production Capacity: 1 DAY

Product Details:

The microprocessor based 4 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 4 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-104 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Additional Information:

• Delivery Time: 1 day

Product Details:

The microprocessor based 4 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 4 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-104 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Additional Information:

• Delivery Time: 1 day

Product Details:

The microprocessor based 4 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 4 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-104 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Additional Information:

• Delivery Time: 1 day

Product Details:

Owing to rich industrial experience we offer a wide assortment of Smoke Detectors These products are able to sense smoke and alarms immediately They are suitable to provide prevention against fire Moreover to meet the requirements of clients we test the quality of these products rigorously under various parameters Our products are available in the market at industry leading prices

Product Details:

Matching up with the requirements of our clients, we are involved in offering Re-24ss Ravel Sounder Cum Strobe.

Additional Information:

• Production Capacity: 1 DAY

Product Details:

• EN54-11 Approved Type A Indoor Use.
• Re-Settable by an element kit.
• Suitable for flush or surface mounting
• Module Addressing by 8 way DIP Switches.
• Low Standby Current

Additional Information:

• Delivery Time: 1 day

Product Details:

The microprocessor based CE mark 12 Zone conventional fire alarm control panel, the system has 20 X 4 LCDcharacter with alpha numeric touch key pad, 12 zones detection circuit, 3 common programmable potential free contacts & 2 common NAC sounder output, inbuilt Rs-485 for Networking – TCP/IP, peer to peer & repeater connectivity, central monitoring facility, inbuilt RTC with Event logs, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

Product Details:

Matching up with the requirements of our clients, we are involved in offering RE-316SH-2L Ravel Photoelectric And Heat Detector.

Additional Information:

• Production Capacity: 1 DAY

Product Details:

• The microprocessor based 2 Zone CE mark
• Zone wise one man walk Test Facility.
• Switch Mode Power Supply.
• Optional Zone Wise Sounder / Zone Wise Contact.
• Compatible to all type of Conventional Detectors.

Additional Information:

• Delivery Time: 1 day

Product Details:

• Alarm status is indicated By Red colour LED.
• Operates on 24 VDC.
• Green Colored for Emergency Release.
• Yellow Colored for Abort.
• 1 No’s of CO & NC Output (Optional).

Additional Information:

• Delivery Time: 1 day

Product Details:

• Slim and Sleek
• Wall or Ceiling mountable
• Mini Horn with BackBox
• 24VDC Operation
• They are used in Fire, Burglar & Emergency Alarm System.

Additional Information:

• Delivery Time: 1 day

Product Details:

The microprocessor based UL listed 8 Zone conventional fire alarm control panel, the system has 16 X 2 LCDcharacter, 8 zones detection circuit,3 common potential free contacts &2 common NAC sounder output, inbuilt Rs-485 for repeater connectivity, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-2558 fire alarm control panel is designed with unique protocol to be used for small & medium establishments, Schools, hospitals, hotels, banks, residential / commercial building, and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Product Details:

he microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Additional Information:

• Delivery Time: 1 day

Product Details:

4 zone fire alarm panel The microprocessor based 4 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 4 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.
RE-104 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Additional Information:

• Delivery Time: 1 day

Product Details:

The RE - 102 / 104 is a 2 / 4 zone microprocessor based conventional Fire Alarm Control Panel. The Panel accepts water flow devices, conventional input devices like 2 wire smoke detectors, pull stations and other normally open contact devices.

Additional Information:

• Delivery Time: 1 day

Product Details:

MODEL RE 25SS
INPUT VOLTAGE 24VDC
ALARM SOUND 11DB
FLASHES/MIN : 60TIMES RE-25SS sounder cum strobe are designed to simplify installations to provide primary and secondary for fire and security applications. These are ideal where smaller notifications devices is desired. The horns can be flush / ceiling mounted with / without back box. Strobe shall be wired as primary (or) secondary signaling notification appliance flashing at 1Hz over entire voltage operating range. Strobe light consists of Xenon flash tube.