System Sensor

Product Details:

Mini-horns shall be a System Sensor Model MHR1 or MHW1 capable of operating at nominal 12 or 24VDC and shall mount to a deep single gang back box. Mini-horn shall be listed to Underwriter’s Laboratories Standard UL464 for protective signaling systems. Mini-horns shall operate between 32 and 120 degrees Fahrenheit from a regulated DC, or full-wave power supply. When used with the SynctCircuit™ Module, 12-volt rated appliance circuit outputs shall operate between nine and 17.5 volts; 24-volt rated appliance circuit outputs shall operate between 17 and 33 volts.

Product Details:

Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range. Installation time and ultimately cost, are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique ‘plug and play’ concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple, but effective with no re-termination required and no time wasted. Through new standards and legislation, both break glass and re-settable operating elements can now be used within a manual call point. To provide you with the greatest ‘flex-ability’, the new MCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered. All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm. Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard. All MCP2 products are supplied with an LED indicator as standard. The MCP2A Product version is supplied with both a resistor and normally open, clean contact electrical options. These options are simpily utilised by attaching the terminal block to the required connection in the back of the MCP product. A variety of resistsor values are available by request, with 470Ω offered as standard. The MCP2B product versions are designed for connection to “savwire” systems. ating element 166b/39 & 166b/40 Pending MCP2 Rev. No. 3 >Product Benefi ts • Unique ‘Plug & Play’ installation concept • Total ‘Flex-Ability’ in the choice of operating element • Anti-Tamper facility • Enhanced aesthetics • Fully approved to the latest standards MCP Indoor Manual Call Point System Sensor India (Technical Services) System Sensor and Devices Honeywell Life Safety Sector 36, 

Product Details:

The 2351TEM photoelectric smoke/thermal detector forms part of the Series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With its multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’. The 2351TEM photoelectric smoke/thermal detector incorporates an optical chamber and a thermal element, which in turn are continually monitored by an on board processor by using algorithms developed specifically for the unit. An alarm signal is only enabled in the detector once the processor is satisfied that an incipient fire has been detected. By using a combination of inputs, the incidence of nuisance alarms is reduced while at the same time, the response time to an actual fire is also improved. The 2351TEM and other detectors in the Series 300 range are backward compatible with the Series 100 detector bases, thus providing the capability to upgrade, extend and maintain existing Series 100 installations. The 2351TEM detector incorporates a bi-colour LED indicator. The integral LED changes colour according to the detector’s status - Green = Normal, Red = Alarm. This benefits the user by providing clear, instant visual indication of the detector’s condition. The Green LED can be programmed for blink/no blink operation. ‘Drift compensation’ algorithms are one of the key features of the 2351TEM detector. These algorithms ensure a consistent alarm sensitivity threshold for periods between service intervals. This provides the user with both a reduction in the frequency of nuisance alarms and maintenance savings by extending the period before cleaning of the detector chamber is required. The sensitivity of a smoke detector is critical to its overall performance, this is reflected in both its ability to detect real fire conditions and its resilience to non-fire stimuli. The 2351TEM’s performance can be optimised for it’s application by selecting from one of three preset alarm thresholds - Low, Medium and High, offering greater stability and optimum performance within the environment in which it has been installed. The selection is easily achieved through the use of a remote hand-held tool. The remote hand-held programming unit can also be used in conjunction with the Series 300 range of detectors to gain access to other advanced features. The features available include: read/write last maintenance date, read chamber contamination level, read value of thermal element and perform an alarm test

Product Details:

The 2351E photoelectric smoke detector forms part of the Series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With its multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’. The 2351E photoelectric detector incorporates an Application Specific Integrated Circuit (ASIC). Combined with the latest state of the art optical chamber the detector provides efficient and accurate detection of fires with a high level of resilience to non-fire environmental influences. The 2351E and other detectors in the Series 300 range are backward compatible with the Series 100 detector bases, thus providing the capability to upgrade, extend and maintain existing Series 100 installations. The 2351E detector incorporates a bi-colour LED indicator. The integral LED changes colour according to the detector’s status - Green = Normal, Red = Alarm. This benefits the user by providing clear, instant visual indication of the detector’s condition. The Green LED can be programmed for blink/no blink operation. ‘Drift compensation’ algorithms are one of the key features of the 2351E detector. These algorithms ensure a consistent alarm sensitivity threshold for periods between service intervals. This provides the user with both a reduction in the frequency of nuisance alarms and maintenance savings by extending the period before cleaning of the detector chamber is required. The sensitivity of a smoke detector is critical to its overall performance, this is reflected in both its ability to detect real fire conditions and its resilience to non-fire stimuli. The 2351E’s performance can be optimised for it’s application by selecting from one of three preset alarm thresholds - Low, Medium and High, offering greater stability and optimum performance within the environment in which it has been installed. The selection is easily achieved through the use of a remote hand-held tool. The remote hand-held programming unit can also be used in conjunction with the Series 300 range of detectors to gain access to other advanced features. The features available include: read/write last maintenance date, read chamber contamination level, read value of thermal element and perform an alarm test.

Product Details:

Mounting plate included for compatibility with a wide range of ?back box sizes, ?Three field selectable candela settings: 15, 75, and 115, Easy to use rotary dials for selection of candela and horn ?settings, Built in synchronization feature keeps strobes in sync for up to ?30 minutes, ?Strobes Listed to UL1638; Horns Listed to UL464, Horn settings on the horn strobe model include high and low ?volume, continuous or temporal 3 tone, ?Round trim ring available for ceiling mount applications, ?Universal Fire symbol is language independent, Trim plate allows mini horn to mount to a variety of backboxes and fit aesthetically with the horn strobe and strobe.

Product Details:

Owing to rich industrial experience we offer a wide assortment of Smoke Detectors These products are able to sense smoke and alarms immediately They are suitable to provide prevention against fire Moreover to meet the requirements of clients we test the quality of these products rigorously under various parameters Our products are available in the market at industry leading prices

Product Details:

Mounting plate included for compatibility with a wide range of ?back box sizes, ?Three field selectable candela settings: 15, 75, and 115, Easy to use rotary dials for selection of candela and horn ?settings, Built in synchronization feature keeps strobes in sync for up to ?30 minutes, ?Strobes Listed to UL1638; Horns Listed to UL464, Horn settings on the horn strobe model include high and low ?volume, continuous or temporal 3 tone, ?Round trim ring available for ceiling mount applications, ?Universal Fire symbol is language independent, Trim plate allows mini horn to mount to a variety of backboxes and fit aesthetically with the horn strobe and strobe.

Product Details:

The 2351E photoelectric smoke detector forms part of the Series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With its multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’. The 2351E photoelectric detector incorporates an Application Specific Integrated Circuit (ASIC). Combined with the latest state of the art optical chamber the detector provides efficient and accurate detection of fires with a high level of resilience to non-fire environmental influences. The 2351E and other detectors in the Series 300 range are backward compatible with the Series 100 detector bases, thus providing the capability to upgrade, extend and maintain existing Series 100 installations. The 2351E detector incorporates a bi-colour LED indicator. The integral LED changes colour according to the detector’s status - Green = Normal, Red = Alarm. This benefits the user by providing clear, instant visual indication of the detector’s condition. The Green LED can be programmed for blink/no blink operation. ‘Drift compensation’ algorithms are one of the key features of the 2351E detector. These algorithms ensure a consistent alarm sensitivity threshold for periods between service intervals. This provides the user with both a reduction in the frequency of nuisance alarms and maintenance savings by extending the period before cleaning of the detector chamber is required. The sensitivity of a smoke detector is critical to its overall performance, this is reflected in both its ability to detect real fire conditions and its resilience to non-fire stimuli. The 2351E’s performance can be optimised for it’s application by selecting from one of three preset alarm thresholds - Low, Medium and High, offering greater stability and optimum performance within the environment in which it has been installed. The selection is easily achieved through the use of a remote hand-held tool. The remote hand-held programming unit can also be used in conjunction with the Series 300 range of detectors to gain access to other advanced features. The features available include: read/write last maintenance date, read chamber contamination level, read value of thermal element and perform an alarm test.

Additional Information:

• Delivery Time: 1 day

Product Details:

Unlike traditional detection systems, Reflected Beam Smoke Detectors were designed for spacious rooms, open areas, and high ceilings; their innovative features make them popular choices for spaces like warehouses, atriums, arenas, and churches. With only one device to install and align, these single-ended optical beam solutions save you time and money on open-area and high-ceiling applications.

Additional Information:

• Delivery Time: 1 day

Product Details:

We are engaged in providing a wide range of System Sensor 2351E Conventional Smoke Detector to our clients.

Fire Projects recommend conventional System sensor 2351E photoelectric smoke detector for all kind of conventional fire alarm panel. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With its multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’. The System Sensor 2351E photoelectric detector incorporates an Application Specific Integrated Circuit (ASIC). Fire Projects has installed smoke detector at several sites that combined with the latest state of the art optical chamber the detector provides efficient and accurate detection of fires with a high level of resilience to non-fire environmental influences. The 2351E and other detectors in the Series 300 range are backward compatible with the Series 100 detector bases, thus providing the capability to upgrade, extend and maintain existing Series 100 installation

Additional Information:

• Delivery Time: 1 day

Product Details:

Owing to rich industrial experience we offer a wide assortment of Smoke Detectors These products are able to sense smoke and alarms immediately They are suitable to provide prevention against fire Moreover to meet the requirements of clients we test the quality of these products rigorously under various parameters Our products are available in the market at industry leading prices