Honeywell Morley

Product Details:

The HM Series Advanced intelligent thermal sensors are plug-in type fire sensors that use a single thermistor sensing circuit to provide early warning of developing fires, together with addressable communication with the fire panel. The HM-RHSE, HM-RHSE-I provides fixed 58°C and rate-of-rise (10°C / minute) temperature sensing (Class A1R)

Product Details:

HM-PSE-UL has a unique unipolar chamber that responds quickly and uniformly to a broad range of smoke conditions. It can withstand wind gusts up to 4,000 feet-per-minute (20 m/sec.) without sending an alarm level signal. Because of its unipolar chamber, the HM-PSE-UL is approximately two times more responsive than most photoelectric sensor – offering enhanced stability

Product Details:

Display:6x40 character (240x64 pixels) blue liquid crystal display with backlight illumination Control Keys: Evacuate, Silence/Resound, Mute Buzzer, Extend Delay, System Reset, Show Alarm Zones Programming Keys: 12 button alpha numeric key pad inc cancel and return keys plus 4 navigation keys and an OK key Programming Keys: 2 independent programmable function keys and LED indicators Indicators: Fire, Fault, Disablement, Test, Buzzer Muted, Delayed Mode, Sounders Silenced, Sounders Disabled and Power. Also dedicated fault LEDs for System Fault, Sounder Fault, Supply Fault and Earth Fault. 40, 80 or 160 LED fire zone indicators optional.

Product Details:

The HM-PSE-AP & HM-PSE-AP-I; photoelectric smoke detector has a completely new detection chamber design, the result of many years of research and design Honeywell. This delivers improved responsiveness, reduced sensitivity changes caused by settling dust and reduced false alarms resulting from insect ingress and other debris. The plug-in unit uses sophisticated processing circuitry that incorporates smoothing filters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms. The devices are managed by embedded software running complex algorithms that further improve resilience to false alarms and improve detection speed. The devices utilize the universal MI/B501AP/IV base, making installation process simple and fast The HM-PSE-AP, HM-PSE-I-AP has two integral red LEDs that provide 360° local visual indication of the device status

Product Details:

An addressable smoke detector is part of an addressable fire alarm system that consists of a group of smoke detectors and devices linked to a central fire control panel. In an addressable fire alarm system, an activated smoke detector can quickly be isolated and found because each device has a unique address or number.

We are the leading supplier of morley ias addressable smoke detectormade available to our clients at competitive prices.

Get the best price for Morley Ias Addressable Smoke Detector

Additional Information:

• Delivery Time: 1 day

Product Details:

DXc4 4 Loop control panel (no zone LEDs) 230Vac,
2 sounder circuits. Supports the Morley-IAS protocol.
391.5 x 390 x 147mm (H x W x D)

Additional Information:

• Delivery Time: 1 day

Product Details:

Matching up with the requirements of our clients, we are involved in offering DXC4 Addressable Fire Alarm System. 

Additional Information:

• Production Capacity: 1 DAY

Product Details:

• Addressable Morley Protocol Call Point
• Part Number : MI-MCP-FLEX-I
• Supplied with Flexible (Plastic) Element
• Flush Mounted - Requires Backbox for Surface Mounting (See Related Products Below)
• Integral Isolator

Additional Information:

• Delivery Time: 1 day

Product Details:

The Morley-IAS MI-DCMO control output module is used with the ZX series of intelligent conrol panels to provide either a single alarm circuit or Form C relay. The MI-DCMO can be used to operte dry contacts for door holders, air handling unit shut down or other similar functions. Optionally the module can be used to supervise wiring to the ouput load providing monitoring of the external load voltage or power supply. If the monitored voltage falls below threshold then a fault condition will be indicated. Each MI-DCMO uses one of the ninety-nine possible module addresses available on a loop. It responds to regular polling from the conrtol panel indicated by a pulsing LED every successful communication. On command from the control panel the MI-DCMO will disconnect the supervision and connnect the external power supply across the load. The disconnection of the supervision provides a positive indication to the control panel that the relay is activated. The MI-DCMO has a built-in isolator which may be switched out if required. The MI-DCMO uses a unique mechanical design allowing each module to be mounted either in a wall box (M200-SMB) or on a DIN rail (using M200-DIN). Irrespective of the mounting method chosen, the address switch is both visible and accessible for selection. To help engineers in the maintenance and fault finding process, both the LEDs and the address switches can be viewed without having to remove the cover of the mounting box. The LEDs, being multi colour, provide diagnostic information regarding the status of the output. For ease of installation, testing and maintenance, the field wiring terminals are of a plug in design. FEATURES • DIN rail mounting option • Surface mounting option • Tri-colour LED status indication • Built-in Short Circuit Isolators • Visible Address selector switches • LED status visible in 2 planes • Plug in connectors • Approved to GEA GEI 1-082 and CEA GEI 1-084

Product Details:

HM-PTSE, HM-PTSE-I-Photoelectric Smoke / Thermal Multi-Criteria Fire Detectors The S200A photoelectric smoke detector has a completely new detection chamber design, the result of many years of research and development. This delivers improved responsiveness, reduced sensitivity changes caused by settling dust and reduced false alarms resulting from ingress of insect and other debris. The plug-in unit uses sophisticated processing circuitry that incorporates smoothing filters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms. The devices are managed by embedded software running complex algorithms that further improve resilience to false alarms and improve detection speed. The HM-PSE, HM-PSE-S2 has two integral red LEDs that provide 360° local visual indication of the device status.

Product Details:

STX 1 loop panel supporting up to 98 devices in a grey color plastic enclosure 

Product Details:

Wall sounder with a white skirt and a red body, nonisolated.* 

Product Details:

Additional Information:

• Delivery Time: 1 day

Product Details:

714-001-221

Two Loop Control Panel, 230Vac, 2 sounder circuits.
Dims 391.5 x 390 x 147mm (H x W x D)

The DX Connexion is an enhancement of the Morley-IAS Dimension panel range, connecting the traditional Morley-IAS qualities of reliability, flexibility and value with advanced features and intuitive functionality.

The multi-protocol DX Connexion range of fire alarm control panels has been developed to be the most time effi cient fi re panel on the market to install. DXc Control panels are supplied without zone LEDs.

In order to connect panels together to create a network a DXc Network card and DXc Control panels are supplied without zone LEDs.

 

Additional Information:

• Delivery Time: 1 day

Product Details:

We are engaged in offering our clients a superior quality range of Conventional Smoke Detector. We design the given product following industrial standards by making use of best quality material and modern technology.

Additional Information:

• Delivery Time: 1 day

Product Details:

714-001-241

Four Loop Control Panel, 230Vac, 2 sounder circuits.
Dims 391.5 x 390 x 147mm (H x W x D)

The DX Connexion is an enhancement of the Morley-IAS Dimension panel range, connecting the traditional Morley-IAS qualities of reliability, flexibility and value with advanced features and intuitive functionality.

The multi-protocol DX Connexion range of fire alarm control panels has been developed to be the most time efficient fire panel on the market to install. DXc Control panels are supplied without zone LEDs.

In order to connect panels together to create a network a DXc Network card and DXc Control panels are supplied without zone LEDs.

Additional Information:

• Delivery Time: 1 day

Product Details:

Mechanical DXc1 DXc2 DXc4 Dimensions [mm] (H x W x D) 260 x 390 x 147 391.5 x 390 x 147 391.5 x 390 x 147 Weight (Excluding Batteries) 4kg 4.5kg 4.5kg Colour RAL 9002 - Grey white RAL 9002 - Grey white RAL 9002 - Grey white Mounting Holes 3 3 3 Knockouts (20mm) Top: 25x Bottom: 2x Top: 25x Bottom: 4x Top: 25x Bottom: 4x Operating Temperature 0°C to +40°C 0°C to +40°C 0°C to +40°C Relative Humidity 5% - 95% non-condensing 5% - 95% non-condensing 5% - 95% non-condensing IP30 (EN6059) IP30 (EN6059) IP30 (EN6059) Material Mild steel sheet rear enclosure. ABS plastic front cover to BS EN60950. All displays and controls are carried on the enclosure door.

Additional Information:

• Delivery Time: 1 day

Product Details:

ZX1Se single loop control panel. 230Vac, 2 sounder circuits, 4 line display and networking capability. 400 x 400 x 135mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian.
1-2 loop control panel. 230Vac, 2 sounder circuits, 4 line display and networking capability. 400 x 400 x 135mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. 1-5 loop control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian.

Additional Information:

• Delivery Time: 1 day

Product Details:

1-5 loop control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian.

Additional Information:

• Delivery Time: 1 day

Product Details:

ZX1Se single loop control panel. 230Vac, 2 sounder circuits, 4 line display and networking capability. 400 x 400 x 135mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian.

Supporting Documents

Additional Information:

• Delivery Time: 1 day

Product Details:

714-001-111

Single Loop Control Panel, 230Vac, 2 sounder circuits.
Dims 260 x 390 x 147mm (H x W x D)

The DX Connexion is an enhancement of the Morley-IAS Dimension panel range, connecting the traditional Morley-IAS qualities of reliability, flexibility and value with advanced features and intuitive functionality.

The multi-protocol DX Connexion range of fire alarm control panels has been developed to be the most time effi cient fi re panel on the market to install. DXc Control panels are supplied without zone LEDs.

In order to connect panels together to create a network a DXc Network card and DXc Control panels are supplied without zone LEDs.

Additional Information:

• Delivery Time: 1 day

Product Details:

   ☆2-wire and 4-wire modes can be programmed
    ☆Plug-in structure
    ☆Loop powered for relay application
    ☆Cable monitored active output suitable for connecting conventional sounders
    ☆Fault and action indicators
    ☆Electronically addressed
    ☆LPCB Approved

Technical Specifications

    ☆Operating Voltage: 24VDC Loop, 24VDC Power Supply
    ☆Operating Current:
      2-wire mode
           Loop: Standby Current 1mA, Active Current 3mA
      4-wire mode
           Loop: Standby Current 1mA, Active Current 3mA
           Power Supply: Standby Current 5mA, Alarm Current 20mA
    ☆Operating Environment:
          Temperature: -10℃ ～+55℃
          Relative Humidity: 93%, non condensing
    ☆Dimension: 120 mm x 80mm x 43mm

Additional Information:

• Delivery Time: 1 day

Product Details:

We are the leading supplier of conventional fire alarm system made available to our clients at competitive prices.

Additional Information:

• Delivery Time: 1 day

Product Details:

• Switch Mode Power Supply
• Modular Construction, Serviceable
• Surface Mount Technology
• Battery polarity & deep discharge protection
• As per IS -15908: 2011 Standard
• 16 X 2 Dot Matrix LCD Display
• Standby battery backup with built in charging
• Fire / Fault status in unambiguous colored LED indication
• Switch Mode Power Supply
• Tactile Keypad for easy panel operation
• System on indication
• Main, Standby status indication
• Low Battery visual warning with audible tone
• Relay output for actuators for Fire and Fault
• Lamp Test facility
• Zone wise one man walk Test Facility
• Zone wise Isolation facility with loop voltage cut off
• Compatible to all type of Conventional Detectors
• Optional Zone Wise Sounder / Zone Wise Contact

Additional Information:

• Delivery Time: 1 day

Product Details:

The HM Series Advanced intelligent thermal sensors are plug-in type fire sensors that use a single thermistor sensing circuit to provide early warning of developing fires, together with addressable communication with the fire panel. The HM-RHSE, HM-RHSE-I provides fixed 58°C and rate-of-rise (10°C / minute) temperature sensing (Class A1R).