Notifier

Product Details:

FSP-951 Series Addressable Photoelectric Smoke Detectors The NOTIFIER® FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics, and are direct replacements for the FSP-851 Series. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. The FSP-951 Series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F (57°C) fixed temperature thermal sensing on the FSP-951T. The FSP-951R is a remote test capable detector for use with DNR Series duct detector housings. FSP-951 series detectors are available for both FlashScan® and CLIP applications as designated.

Product Details:

The NOTIFIER® FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics, and are direct replacements for the FSP-851 Series. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. The FSP-951 Series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F (57°C) fixed temperature thermal sensing on the FSP-951T. The FSP-951R is a remote test capable detector for use with DNR Series duct detector housings. FSP-951 series detectors are available for both FlashScan® and CLIP applications as designated.

Product Details:

The series 100 range of Conventional detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology.’
The Series 100 detector incorporates a bi-colour LED indicator. The integral LED is blinking Green when the detector’s status is Normal and turns steady Red when it is in Alarm. This benefits the user by providing clear, instant visual indication of the detector’s condition. An optional remote LED annunciator may be used to repeat any alarm signal.
A laser-based hand held Remote Test Unit can be used in conjunction with the detectors for alarm test purpose. The unit transmits a coded message, preventing spurious alarms being generated by other laser-based devices.
A variety of detector bases can be used with the AD 338 – 2L detector, providing application flexibility and compatibility with a wide range of Fire Alarm Control Panels. All bases are fitted with a shorting spring to permit circuit testing prior to fitting the detectors and have a tamper resistance feature, which when activated prevents removal of the detector without the use of a tool.

Additional Information:

• Delivery Time: 1 day

Product Details:

Specification/Additional Details

Product TypeConventional

BrandAgni

Usage/ApplicationOffice Buildings

Alarm Sensor TypePhotoelectric

Country of OriginMade in India

ColorWHITE

Product Details:

Advance microprocessor base 1/2 loop Analog Addressable Fire Alarm Control Panel
Panel developed on APOLLO CORE PROTOCOL Support
Panel can support all the devices of - Apollo XP95 series - Apollo Discovery series - Apollo Soteria series
Each Loop can support 252 addressable devices
The panel is having inbuilt RS-485 networking card
Operates on 180 - 265V, 50 Hz, AC Mains power supply
Standby (battery) backup 24V DC power supply with built in-charger
128*64 character graphics LCD Display
12 push button Alfa numeric Keypad for easy programming
3 Level Security Password Protection
Real Time Clock
Events Log Storage Capacity up to 2100 events
Cause & Effect support up to 99 various combinations
Three operand support for developing C&E logics (OR, AND & NOT)

Additional Information:

• Delivery Time: 1 day

Product Details:

• Operates on 230 V AC, 50 Hz AC supply
• Battery backup with built in charger
• Fire, fault status in unambiguous colored LED indications.
• 16 x 2 line dot matrix LCD display
• Zone wise fire, open, short LED indications.
• External switches to test each zone fire, open, short status manually.
• External switch for reset, Silence, Lamp test.
• Zone isolation facility with loop voltage cutoff.
• Relay O/P for actuators.
• Mains on, System On, Charger on, visual indications.
• Battery Low & Common fire indications
• Auto dialer attachable facility
• Enough inside space for battery
• Attachable with all types of detectors.

Additional Information:

• Delivery Time: 1 day

Product Details:

The Series 100 detector incorporates a bi-colour LED indicator. The integral LED is blinking Green when the detector’s status is Normal and turns steady Red when it is in Alarm. This benefits the user by providing clear, instant visual indication of the detector’s condition. An optional remote LED annunciator may be used to repeat any alarm signa

Additional Information:

• Delivery Time: 1 day

Product Details:

Additional Information:

• Delivery Time: 1 day

Product Details:

Model QS-300-RB smoke detector uses a specialized smoke chamber design, which could sense the presence of smoke particles produced by fast combustion or slow smoldering fire.

The QS-300-RB detectors have an external relay, provides Single/Double sets of volt-free changeover (form C) contacts change state when the detector signals an alarm.

The detector will work with most modern fire alarm control panels、security systems, and meets the requirements of UL 268 and EN 54-7.

Additional Information:

• Delivery Time: 1 day

Product Details:

We are engaged in offering our clients a superior quality range of Conventional Smoke Detector. We design the given product following industrial standards by making use of best quality material and modern technology.

Additional Information:

• Delivery Time: 1 day

Product Details:

9 to 32 VDC Volts Non-polarized

Standby Current

≤100µA @ 24 VDC

Maximum Alarm Current (LED on )

≤55mA @ 24 VDC

Operating Humidity Range

10% to 93% Relative Humidity, Non-condensing

Operating Temperature Range

14°F to 120°F (-10°C to 49°C)

Adjustable Sensitivity

1-2.5%/FT

Height

2.2˝ (55 mm) installed in Base

Diameter

4.0˝ (103 mm)

Weight

5.5 oz. (155 g)

Additional Information:

• Delivery Time: 1 day

Product Details:

Matching up with the requirements of our clients, we are involved in offering 24 V Agni Smoke Detector.

Additional Information:

• Item Code: 2351E
• Production Capacity: 1 DAY

Product Details:

We are the leading supplier of notifier addressable fire alarm systemmade available to our clients at competitive prices.

Additional Information:

• Delivery Time: 1 day

Product Details:

Owing to rich industrial experience we offer a wide assortment of Smoke Detectors These products are able to sense smoke and alarms immediately They are suitable to provide prevention against fire Moreover to meet the requirements of clients we test the quality of these products rigorously under various parameters Our products are available in the market at industry leading prices