Honeywell Notifier Smoke Detector

Product Details:

 Features:

• Using a state of-the-art optical sensing chamber
• Designed to provide open area protection
• Can be used with any conventional fire alarm control panel
• Two LEDs on each detector provide local 360° visible alarm indication
• Flash every 3~5 seconds indicating that power is applied and the detector are working properly
• LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit
• The alarm can be reset only by a momentary power interruption
• Dustproof, moth-proof, anti-light interference design

Additional Information:

• Delivery Time: 1 day

Product Details:

FSP-851(A) plug-in detectors use a separate base to simplify installation, service, and maintenance. A special tool allows maintenance personnel to plug in and remove detectors without using a ladder. Mount base (all base types) on an electrical backbox which is at least 1.5" (3.81 cm) deep. For a chart of compatible junction boxes, see DN-60054. NOTE: 1) Because of inherent supervision provided by the SLC loop, end-of-line resistors are not required. Wiring “T-taps” or branches are permitted for Style 4 (Class “B”) wiring. 2) When using relay or sounder bases, consult the ISO-X(A) installation sheet I56-1380 for device limitations between isolator modules and isolator bases.

Product Details:

FSP-851 Smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel.
Features:
• Sleek, low-profile design.
• Addressable-analog communication.
• Stable communication technique with noise immunity.
• Low standby current.
• Compatible with FlashScan® and CLIP protocol systems.
• Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on FlashScan systems).
• Dual LED design provides 360° viewing angle.
• Visible bi-color LEDs blink green every time the detector is addressed, and illuminate steady red on alarm (FlashScan systems only).
• Remote test feature from the panel.
• Walk test with address display (an address on 121 will blink
the detector LED: 12-[pause]-1(FlashScan systems only).
• Built-in functional test switch activated by external magnet.

Additional Information:

• Production Capacity: 1 DAY

Product Details:

To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range of FAPT-851 Addressable Notifier.

Additional Information:

• Delivery Time: 1 day

Product Details:

Additional Information:

• Delivery Time: 1 day

Product Details:

We are the leading supplier of notifier smoke detectorsmade available to our clients at competitive prices.

Additional Information:

• Delivery Time: 1 day

Product Details:

• Addressable Morley Protocol Call Point
• Part Number : MI-MCP-FLEX-I
• Supplied with Flexible (Plastic) Element
• Flush Mounted - Requires Backbox for Surface Mounting (See Related Products Below)
• Integral Isolator

Additional Information:

• Delivery Time: 1 day